DIY queen bed frame plans give you the capability to build your own bed frame at home. These bed frame plans have everything needed to build your bed from scratch – from the frame to the mattress to the headboard.
These DIY queen bed frame plans can be constructed in your garage or even in the comfort of your own home.
The queen-size bed frame plans are the most popular of all. This is because it is that large enough to enable both partners to sleep comfortably, leaving space for cuddling and sleeping without interruption.
A good queen-size bed frame plan will ensure durability and longevity since this is primarily used for sleeping, but also all other activities. The best bed frame plans are made of metal, because it is tough and long-lasting, making the choice easy for most people to choose between metal or wood.
DIY Queen Bed Frame Plans
1. Simple Classic Storage Bed (Queen Size)
The first-bed frame plan that we will cover is a classic storage bed design. It includes drawers underneath the bed for convenient storage, which can come in very handy. The bed frame is made of wood and finished with high gloss paint, so it will look stylish and neat in the room.
To build this queen size bed frame plan you need:
- 3 x 8 boards for the headboard and footboard (these will be 38″ long)
- 2 x 4 boards for the side rails (these will be 78″ long)
- 2 x 8 boards for the side rails (these will be 38″ long)
- 3 x 2 boards for the drawers. These should be 10″ wide and 38″ long, cut in half to create 6 equal pieces
- 1 ½” nails or screws
Step-by-step process of building
- Find a suitable location in the room, and put the side rails of the bed frame there, making sure they are parallel to each other
- Next, attach the side rails to the headboard and footboard using nails or screws
- Now you can start on the legs of the bed. Glue and screw all six pieces of 2 x 4 for each bed leg together, forming a triangular base
- Attach each leg to the side rails using glue and screws or nails
- Finally, attach the drawers to the bottom of the bed frame using glue and screws or nails
You can easily adjust this queen-size bed frame plan by altering the measurements you decide to use to fit the space in your room exactly. This is a good option if you prefer not to measure and mark too much while building it, and instead just get on with construction.
Once it’s built you could stain or paint it so that it matches your decor scheme perfectly. Keeping this tip in mind you’ll find that this is not a difficult bed frame plan to follow at all, which is why it is one of the most popular among DIY enthusiasts.
2. Wood Murphy Bed Plan for a Queen Mattress
A great queen-size bed frame plan that will effortlessly blend into your home, while giving you storage space under the mattress while not in use. This makes it very convenient for those with limited space or those who simply don’t want their bedroom to look cluttered.
To make this bed frame you need:
- 1 x 8 boards for headboard and footboard (these will be 38″ long)
- 2 x 4 boards for side rails (these will be 78″ long)
- 3 x 8 boards for the bracing boards (these will be 28″ long)
- 2 x 2-inch boards for slats on the bottom of the bed frame plan (cut in half to form 12 equal pieces – these will be 46.5″ long)
- Screws that match your wood choice
Step-by-step process of building
- Starting with the twin mattress sized headboard and footboard, measure the width of the mattress (in this case 38″)
- Mark where you will attach the bracing boards (28″ long) on each end of the headboard and footboard
- Attach the bracing boards at your marked positions
- Move onto attaching the side rails to each end of the bed frame plan using nails or screws; make sure they are parallel to each other
- Now attach the legs to both ends of each side rail using a nail or screw 6. The next step is to attach all three 8-inch wide x 28 inch long bracing boards at equal intervals along both side rails
- Fit in all twelve 2″ x 4′ slats across how many gaps there are between the bracing boards, and secure them in place with glue or nails
- Using 1 x 8-inch boards as a top layer of both headboards and footboards will not only look good from your mattress side but also from the other side too.
The slats on the bottom of this bed frame plan serve as a foundation for futon mattresses, making it an ideal choice for anyone who does not need to use box springs underneath their bed.
This is one queen-size bed frame plan that is very easy to make without having prior experience with woodworking; if you can measure accurately and follow instructions you’ll be fine. Using wooden screws instead of nails is recommended for added stability, but not necessary.
3. Rustic Barnwood Platform Queen Bed Plan
This rustic-looking bed frame plan is a great option for those of you who have some spare Barnwood, or old wood that you want to repurpose into a beautiful-looking queen-size bed. You’ll probably need a friend’s help with this one, as it can be rather tricky splitting large pieces of wood in half without cracking them.
To make this bed frame you need:
- 1 x 12-inch boards (cut in half to form 24 equal pieces – these will be 48″ long)
- 1 x 8-inch boards (cut in half to form 24 equal pieces – these will be 48″ long)
- 1 x 4-inch boards (cut in half to form 24 equal pieces – these will be 48″ long)
- 4 x 4 inch posts (cut in half to form 8 equal pieces – these will be 38″ long)
- 2 x 12 boards for the headboard and footboard (48″, cut to size)
- 1 x 10 board for the side rails (78.5″, cut to size)
- 2 x 6 boards for the side rails (78.5″ long on the middle rail and 23.75″ long for the outer/end rails – these will be cut to size)
- Screws that match your wood choice.
Step-by-step process of building
- Leave the top and bottom board uncut at the headboard and footboard end – they should be 60 inches long.
- Using 5/4 x 8-inch boards, cut them into 3 equal pieces and attach them in place of the centerboard in each set of 12 board sections making sure that you have a gap at the headboard and footboard end to fit around the perpendicular boards.
- Using 1 x 4 X 6-inch boards, cut them down to size so you can use them as slats for the bed frame plan (these should be 48 inches long)
- Fit all twelve 1 x 4 slats across how many gaps there are between the 5/4 x 8-inch boards
This one is a little more complicated than your average queen-size bed frame plan, but it’s still easy enough to complete if you follow instructions carefully. It makes use of old wood which is great for the environment, and it adds character to your bedroom.
You can choose how you want to handle the headboard and footboard attachments, so there’s no need to worry about pre-drilled holes – just be careful when splitting wood in half.
4. Collapsible Bed Frame
This is one of the most unique queen-size bed frame plans we’ve seen; it’s great if you need to set up your bed in a hurry on some occasions, and also for added privacy at other times.
To make this collapsible bed frame you will need:
- 2 x 4-inch boards (cut into equal pieces that are 10 inches long)
- 1 x 12-inch boards (cut into equal pieces that are 10 inches long)
- 4 x 3 hinges
- 2 x 2-inch boards (each piece should be cut into equal pieces that are 9 inches long)
- 4 bolts and nuts to attach the bolts
- Drill with 3/4 inch bit
Step-by-step process of building
- Attach the two outside leg pieces to form an L shape with screws or nails
- Repeat step 1 on the other side so that both legs are attached in an L shape
- Layout the four inner support beams at equal intervals between each leg making sure that they’re all the same height
- Attach each inner beam with a hinge to make a supporting structure for the bed
- Using 2 x 4-inch pieces of wood, attach them on top of each support piece with hinges – these will hold up the mattress
- Grab your queen size mattress and secure it to the support beams with bolts and nuts
This is a brilliant option if you have one room set up as a guest bedroom, but need to use it as something else from time to time because of its quick set-up design.
It’s also great if you struggle putting together DIY projects that require heavy drilling or screwing as there are no screws or nails used in this project – just lots of hinges.
5. Free Queen Size Bed Plan
This queen-size bed frame plan is perfect for those of you who would rather use your imagination to come up with the overall design of the bed. The specifications for this bed frame plan will show you how to make flat center support and four head and footboards attached using hinges.
To make this bed frame you need:
- 1 x 4-inch boards (cut in half to form 2 equal pieces – these will be 78 inches long)
- 1 x 3 board (this will be 64 inches long)
Step-by-step process of building
- Measure your mattress width and starting with the headboard end, attach one 48 inches longboard across it using nails or screws making sure that it’s centered on the board.
- Using 1 x 6 X 8-inch boards cut out four sections measuring approximately 16 inches wide X 26 inches (for each side). Attach hinges to this section allowing it to fold over the center support when you want the bed down for sleeping.
- Using 2 more 1 x 6 X 8-inch boards, cut them into 2 sections measuring 20 inches wide (for each headboard) and affix them to the hinges.
- Using 2 more 1 x 6 X 8-inch boards, cut them into 2 sections measuring 24 inches wide (for each footboard) and affix them to the hinges.
- Attach a latch hook to the center support and one of each head/footboard section so they can be latched together when in use. When you want to fold the bed down for sleeping unhook these latches and lift.
This queen-size bed frame plan is simple enough that even beginners should be able to complete it with little difficulty. The result will be an incredibly sturdy bed that can hold even heavy mattresses without any problems at all.
6. DIY Bed Frame
7. How to Make Queen Size Bed Frame
8. Rustic Bed Frame – Queen Size
9. Pallet Wood Bed Frame: Queen Size
10. Sturdy Queen Bed
11. Cherry Queen Bed
12. Bed Frame
13. Bed Frame
14. Queen Size Platform Bed
15. Full to Queen Bed Extension
16. Queen Bed Slatted Headboard
17. DIY Bed Frame
18. $15 Bed Frame
19. Simple Bed Frame
In Summary
The number of DIY projects that you can make out of wood is so large that it’s hard to keep track of them all!
If you’re interested in building your own furniture, you can start with the basics: sofa and dining tables, chairs, and beds. And since the Internet has a lot of resources for all of these different DIY projects, you’ll be able to research the plans and supplies you need to complete the project.
With today’s modern home furnishings, many of us are looking to create a unique look for our home. Whether it’s an individual piece or a complete home renovation, bed frames are an important part of a room’s décor and utility. Queen bed frame plans are a breeze to make and can be customized to your own personal tastes.
There are many different types of queen-size bed frame plans available, but all of these plans should provide hours of entertainment and fun during their construction.
Now that you’ve read through these 19 queen-size bed frame plans, I’m sure you’ll have an even better idea of which one suits your taste. And remember to keep checking back for anything else related to home improvement that may catch your eye.
Hi, my name’s Elena Coolidge. I’m a DIY enthusiast who loves building fun woodworking plans. These DIY plans are fun hobby projects for enthusiasts or even more advanced builders that want to build things like bunk beds, end tables or even a duck box!
